Product Description
Machine introduction
1. Electric adjustment phase mechanism, dual operation of computer buttons.
2. Controllable ink roller lifting, pneumatic roller lifting, electric ink distribution function.
3. The main transmission is made of high-quality steel, and keyless connectors are used to eliminate the gaps caused by traditional connections, so as to maintain long-term accurate printing color registration. The transmission lubrication mechanism adopts spray type, and the lubrication system circulates automatically.
4. Cylinder locking is adopted between each unit, and the whole machine has a strong self-locking mechanism to ensure the stability of the unit.
1. Printing phase, dual operation of electric buttons.
2. The anilox roller is pneumatically lifted and lowered, falling when printing, and lifting when not printing.
The printing roller axial direction is manually adjusted, with a maximum movement of 10mm on each side, and a locking mechanism.
3. The plate roller and the stamping roller are surface-grinded and hardened, and the dynamic balance is calibrated on the rough and fine equipment respectively to ensure the best balance point.
4. The planetary gear-type accompanying adjustment mechanism with digital display function performs electric phase adjustment on the plate roller.
5. With the pneumatic automatic lifting device of the paper feeding system, (the anilox roller descends and contacts the printing plate when feeding paper, and rises and separates from the printing plate when stopping feeding paper) and an idling device is attached.
1. Paper feeding section
1. The workbench is welded with 100mm square steel, the table thickness is 3mm, and the workbench chain is a 6-point chain to drive the paper
2. Printing section: (optional 1-4 color printing)
1. Printing roller:
1) The outer diameter is: 470mm, (including the outer diameter of the plate: 480mm).
2) The steel pipe surface is ground and hard chrome plated.
3) Balance correction is performed for smooth operation.
2. Paper feeding upper and lower rollers:
1) The upper roller has an outer diameter of 86mm and is a thick-walled steel pipe. Equipped with two quick-adjusting paper feeding wheels.
2) The lower roller has an outer diameter of 140mm, a thick-walled steel pipe, and the surface is ground and hard chrome plated.
3) The paper feeding roller gap dial is manually adjusted, and the adjustment range is 0-12mm.
3. Anilox roller
1) The outer diameter is 180mm (mesh number: 180, 200, 220, 240, 260). (Mesh number is optional)
2) The surface of the steel tube is ground, the mesh is pressed, the surface is ground, and hard chrome is plated.
3) Balance correction is performed, the operation is smooth, the dots are consistent, and the ink is applied evenly.
4) The anilox roller is equipped with a wedge overrunning clutch, which can evenly distribute the ink and wash the ink.
5) The anilox gap dial is manually adjusted.
4. Rubber roller:
1) The outer diameter is φ180mm.
2) The surface of the steel tube is wrapped with wear-resistant rubber and balanced.
3) The rubber roller is specially ground in the middle and high, and the ink transfer effect is good.
4) The hardness of the rubber is 60-65 degrees.
5. Phase adjustment mechanism:
1) Planetary gear business structure.
2) The printing phase is adjusted by computer 360 degrees (both running and stopping can be adjusted).
3) Manually adjust the horizontal position, the adjustment distance is ±10mm.
7. Ink circulation
1) Pneumatic diaphragm pump, stable ink supply, convenient and quick operation and maintenance.
2) Ink filter, filter impurities.
7. Printing phase fixing device:
1) Cylinder brake device
2) When the machine is separated to adjust the phase, the brake mechanism limits the operation of the machine and maintains the original gear position fixed point.
6. Oil supply device:
1) Mechanical oil pump.
2) Circulating oil supply, uniform ink application of gears, and balanced oil level of each group.
3. Slotting part
. The upper press wheel adopts the latest press wheel to protect the plasticity of the cardboard from damage.
2. The bottom knife diameter is 280, and the upper and lower slotting knives are manually moved axially by left and right synchronous linkage for synchronous adjustment.
3. Planetary gear gear phase adjustment mechanism with digital display function, electric adjustment of slotting phase.
4. Select high-quality alloy steel slotting knife, the tooth blade width is 7mm.
5. The slotting panel operation part is equipped with paper feed on/off and main machine electric buttons, with multi-point adjustment operation function.
6. Upper and lower rollers for pressing wire
1) Upper pressing wire: outer diameter is Ф110 seamless steel pipe, surface grinding, hard chrome plating.
2) Lower pressing wire: outer diameter is Ф110 seamless steel pipe, surface grinding, hard chrome plating.
7. Upper and lower rollers for knife shaft
1) Upper knife shaft: outer diameter is Ф156 seamless steel pipe, surface grinding, hard chrome plating.
2) Lower knife shaft: outer diameter is Ф156 seamless steel pipe, surface grinding, hard chrome plating.
5. Transmission gear:
1) 40Cr alloy steel, tempered, shaved, and nitrided.
2) Six-level precision, smooth operation, low noise, hardness HRC55-60, long life, low wear, can ensure the unchanged printing color registration accuracy for a long time.
3. The transmission parts of the whole machine (shaft and gear connection) all use keyless connection (expansion sleeve) to eliminate the connection gap, which is suitable for long-term high-speed operation with large torque.
VI. Oil supply device:
1) Mechanical double oil pump oil supply.
2) Circulating oil supply, the gear oiling amount is uniform, and the oil level of each group is balanced.
3) Lubrication adopts closed spray lubrication system to ensure transmission accuracy and life.
Detailed Photos
Product Parameters
| 480*2600 semi-automatic two-color printing slotting machine |
| Inner width of wallboard 2600mm |
Inner width of wallboard 2600mm |
| Machine design speed 80 pieces/min |
Machine design speed 80 pieces/min |
| Machine economic speed 40-60 pieces/min |
Machine economic speed 40-60 pieces/min |
| Maximum paper size 2500*1400mm |
Maximum paper size 2500*1400mm |
| Minimum paper size 350*600mm |
Minimum paper size 350*600mm |
| Maximum printing size 2300*1400mm |
Maximum printing size 2300*1400mm |
| Maximum sheet size 2500*1600mm |
Maximum sheet size 2500*1600mm |
| Slot width*slot depth 7*450 (blades can be added to increase slot depth) |
Slot width*slot depth 7*450 (blades can be added to increase slot depth) |
| Standard version thickness Hanging version: 7.2mm |
Standard version thickness Hanging version: 7.2mm |
| Main motor power 4.5Kw |
Main motor power 4.5Kw |
| Total power 7Kw |
Total power 7Kw |
| Color registration accuracy ±0.5mm |
Color registration accuracy ±0.5mm |
| Minimum slot spacing 244*60*244*60 |
Minimum slot spacing 244*60*244*60 |
| Overall dimensions Length 6000*Width 3600*Height 1800 |
Overall dimensions Length 6000*Width 3600*Height 1800 |
Company Profile
){kind=link}